3com 5104M-FIB Manual De Usuario
CLEAR PROTOCOLS
2-21
CLEAR PROTOCOLS
Use the CLEAR PROTOCOLS command to remove a protocol filter from an
CoreBuilder 5000 SwitchModule.
CoreBuilder 5000 SwitchModule.
Format
Example
The following command deletes the filter for Ethernet DECnet Phase IV packets
from the protocol forwarding table:
from the protocol forwarding table:
CB5000> clear protocols 4.1 enet 60-03
Filter cleared.
Related Commands
SET PROTOCOLS FORWARDING
SHOW PROTOCOLS
SHOW PROTOCOLS
clear protocols
dsap
enet
slot.1
snap
type field
slot.1
Identifies the SwitchModule that is affected by this command.
dsap
Delete a filter for packets with the protocol type DSAP.
enet
Delete a filter for packets with the protocol type Ethernet.
snap
Delete a filter for packets with the protocol type SNAP (SubNetwork
Access Protocol).
Access Protocol).
type field
Specifies the type field of the protocol filter you are deleting.