3com 100 TX Manual De Usuario

C

HAPTER

 2: I

NSTALLING

 

THE

 FMS 100-TX H

UB

6 Attach brackets to both sides of the other hubs to be rack-mounted, as 

described in steps 2 through 4.

7 Insert each hub into the rack and fasten each one individually to the rack 

uprights, as shown in Figure 2-3.

Figure 2-3   Installing a Hub Stack in a Rack

8 Repeat steps 2 through 7 when placing additional hubs in the stack.

9 For each hub, plug one end of the power cord into the AC power connector 

and the other end into a power source. (Refer to the section “Using the 
Redundant Power System” for information on installing the Redundant 
Power System.)

All the LEDs should light momentarily. Verify that the PWR (power) LED 
remains ON, indicating that the hub is receiving power.

See Chapter 3 for information about connecting the stack to the network 
and interpreting LEDs.

®

3C250-TX/

Ι

®

3C250-TX/

Ι

®

3C250-TX/

Ι