3com 3 Manual De Usuario

To manage a Switch using the web interface over an IP network:

1 Check that you have the IP protocol correctly installed on your 

management workstation. You can check this by trying to browse the 
World Wide Web. If you can browse, the IP protocol is installed.

2 Check you can communicate with the Switch by entering a 

ping 

command at the DOS prompt in the following format: 

(where xxx.xxx.xxx.xxx is the IP address of the Switch)

If you get an error message, check that your IP information has been 
entered correctly and the Switch is powered up.

3 Open your web browser and enter the IP address of the Switch that you 

wish to manage in the URL locator, for example, in the following format:

4 At the login and password prompts, enter 

 as your user name and 

press Return at the password prompt (or the password of your choice if 
you have already modified the default passwords).

5 Click on the Device View button to display the web management options.

Any network management application running the Simple Network 
Management Protocol (SNMP) can manage a Switch if:

■

The correct Management Information Bases (MIBs) are installed on the 
management workstation.

■

The management workstation is connected to the Switch using a port 
in VLAN 1 (the Default VLAN). By default, all ports on the Switch are in 
VLAN 1.

Mozilla 1.0

✓

✓

✕

✓

✓

DUA1730-0AAA03.book  Page 49  Thursday, November 17, 2005  12:17 PM