3com 10014917 Manual De Usuario
3Com Switch 4200G Family
5
Command Reference
cd
Use the
cd
command to enter a specified directory on the Ethernet switch.
User view
cd
Use the
cd
command to change the work path on the remote FTP server.
FTP Client view
cdup
Use the
cdup
command to return to the upper directory.
SFTP Client view
cdup
Use the
cdup
command to enter the parent directory.
FTP Client view
check region-configuration
Use the
check region-configuration
command to display the configurations of the MST regions that are
not activated.
MST Region view
clock datetime
Use the
clock datetime
command to set the current system time and date.
User view
clock summer-time
Use the
clock summer-time
command to set the name, time range, and offset of the daylight saving time.
User view
clock timezone
Use the
clock timezone
command to set local time zone information.
User view
close
Use the
close
command
to terminate an FTP connection without quitting FTP client view.
FTP Client view
cluster
Use the
cluster
command to enter cluster view.
System view
cluster enable
Use the
cluster enable
command to enable the cluster function on a switch.
System view
cluster-local-user
Use the
cluster-local-user
command to configure a Web username and password for all cluster
members.
Cluster view
cluster-mac
Use the
cluster-mac
command to configure a multicast MAC address for cluster management. Run this
command only on the management device only.
Cluster view
cluster-mac syn-interval
Use the
cluster-mac syn-interval
command to set the interval for the management device to send
multicast packets. This command can be executed on the management device only.
Cluster view
cluster-snmp-agent community
Use the
cluster-snmp-agent community
command to configure a SNMP community for a cluster to enable
SNMP access.
Cluster view
cluster-snmp-agent group v3
Use the
cluster-snmp-agent group
command to configure a SNMP group for a cluster to map SNMP
users to the SNMP view.
Cluster view
cluster-snmp-agent mib-view included
Use the
cluster-snmp-agent mib-view
command to create or update the information about the MIB view
configured for a cluster.
Cluster view