SMC Networks SMC6750L2 Manual De Usuario

Descargar
Página de 272
C
ONFIGURING
 
THE
 S
WITCH
2-78
CLI – This example displays all the known multicast services supported on 
VLAN 1, along with the ports propagating the corresponding services. 
The type field shows if this entry was learned dynamically or was statically 
configured.
Adding Multicast Addresses to VLANs
Multicast filtering can be dynamically configured using IGMP Snooping 
and IGMP Query messages as described in “Configuring IGMP 
Parameters” on page 2-72.
 For certain application that require tighter 
control, you may need to statically configure a multicast service on the 
switch. First add all the ports attached to participating hosts to a common 
VLAN, and then assign the multicast service to that VLAN group. 
Command Usage
Static multicast addresses are never aged out.
When a multicast address is assigned to specific VLAN, the 
corresponding traffic can only be forwarded to ports within that 
VLAN.
Command Attribute
Interface – Activates the Port or Trunk scroll down list.
VLAN ID – Selects the VLAN to propagate all multicast traffic coming 
from the attached multicast router/switch.
Multicast IP – The IP address for a specific multicast service
Port or Trunk – Specifies the interface attached to a multicast router.
Console#show bridge 1 multicast vlan 1
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
224.0.0.12
Eth1/12
USER
1
224.1.2.3
Eth1/12
IGMP
Console#