SMC Networks SMC6750L2 Manual De Usuario
L
INE
C
OMMANDS
3-61
password-thresh
Use this command to set the password intrusion threshold which limits the
number of failed logon attempts. Use the no form to remove the
threshold value.
number of failed logon attempts. Use the no form to remove the
threshold value.
Syntax
password-thresh threshold
no password-thresh
no password-thresh
threshold - The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
(Range: 1-120; 0: no threshold)
Default Setting
The default value is three attempts.
Command Mode
Line Configuration
Command Usage
• When the logon attempt threshold is reached, the system interface
becomes silent for a specified amount of time before allowing the next
logon attempt. Use the silent-time command to set this interval.
logon attempt. Use the silent-time command to set this interval.
• This command applies to both the local console and Telnet
connections.
Example
To set the password threshold to five attempts, enter this command:
Related Commands
silent-time
Console(config-line)#password-thresh 5
Console(config-line)#
Console(config-line)#