SMC Networks SMC6750L2 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-70
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
To force operation to the speed and duplex mode specified in a
speed-duplex command, use the no negotiation command to disable
auto-negotiation on the selected interface.
speed-duplex command, use the no negotiation command to disable
auto-negotiation on the selected interface.
Example
The following example configures port 5 to 100 Mbps, half-duplex
operation.
operation.
Related Commands
negotiation
negotiation
Use this command to enable autonegotiation for a given interface. Use the
no form to disable autonegotiation.
no form to disable autonegotiation.
Syntax
negotiation
no negotiation
no negotiation
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
If autonegotiation is disabled, auto-MDI/MDI-X pin signal
configuration will also be disabled for the RJ-45 ports.
configuration will also be disabled for the RJ-45 ports.
Console(config)#interface ethernet 1/5
Console(config-if)#speed-duplex 100half
Console(config-if)#no negotiation
Console(config-if)#
Console(config-if)#speed-duplex 100half
Console(config-if)#no negotiation
Console(config-if)#