SMC Networks SMC6750L2 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-78
Command Mode
Normal Exec, Privileged Exec
Example
This example shows the configuration setting for Ethernet port 25.
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Console#show interfaces switchport ethernet 1/25
Broadcast threshold: Enabled, 500 packets/second
Lacp status: Disabled
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan:
Lacp status: Disabled
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan:
1(u),
Forbidden Vlan:
Console#
Command
Function
Mode Page
bridge address
Maps a static address to a port in a VLAN
GC
show bridge
Displays classes of entries in the
bridge-forwarding database
bridge-forwarding database
PE
clear bridge
Removes any learned entries from the
forwarding database and clears the transmit and
receive counts for any statically or system
configured entries
forwarding database and clears the transmit and
receive counts for any statically or system
configured entries
PE
bridge-group
aging-time
aging-time
Sets the aging time of the address table
GC
show bridge
aging-time
aging-time
Shows the aging time for the address table
PE