SMC Networks SMC6750L2 Manual De Usuario
S
YSTEM
D
EFAULTS
1-13
System Defaults
The switch’s system defaults are provided in the configuration file
“Factory_Default_Config.cfg.” To reset the switch defaults, this file
should be set as the startup configuration file. See “Setting the Startup
Configuration File” on page 2-19.
“Factory_Default_Config.cfg.” To reset the switch defaults, this file
should be set as the startup configuration file. See “Setting the Startup
Configuration File” on page 2-19.
The following table lists some of the basic system defaults.
Function
Parameter
Default
IP Settings
Management. VLAN
1
DHCP
Enabled
BOOTP
Disabled
User Specified
Disabled
IP Address
0.0.0.0
Subnet Mask
255.0.0.0
Default Gateway
0.0.0.0
Web Management HTTP Server
Enabled
HTTP Port Number
80
SNMP
Community Strings
“public” (read only)
“private” (read/write)
“private” (read/write)
Authentication Failure
Traps
Traps
Enabled
Link-up-Down Traps
Enabled
Security
Privileged Exec Level
Username “admin”
Password “admin”
Password “admin”
Normal Exec Level
Username “guest”
Password “guest”
Password “guest”
Enable Privileged Exec
from Normal Exec Level
from Normal Exec Level
Password “super”
RADIUS Authentication Disabled