SMC Networks SMC6750L2 Manual De Usuario
C
ONFIGURING
THE
S
WITCH
2-48
CLI – This example creates a new VLAN.
Adding Interfaces Based on Membership Type
Command Attributes
•
Port – Port identifier.
•
Trunk – Trunk identifier.
•
VLAN – ID of configured VLAN (1-4094, no leading zeroes).
•
Name – Name of the VLAN (1 to 64 characters).
•
Status – Shows if this VLAN is enabled or disabled.
- Enable: VLAN is operational.
- Disable: VLAN is suspended; i.e., does not pass packets.
- Enable: VLAN is operational.
- Disable: VLAN is suspended; i.e., does not pass packets.
•
Membership Type – Select VLAN membership for each interface
by marking the appropriate radio button for a port or trunk:
by marking the appropriate radio button for a port or trunk:
- Tagged: Interface is a member of the VLAN. All packets
transmitted by the port will be tagged, that is, carry a tag and
therefore carry VLAN or CoS information.
therefore carry VLAN or CoS information.
- Untagged: Interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and
therefore not carry VLAN or CoS information. Note that an
interface must be assigned to at least one group as an untagged port.
therefore not carry VLAN or CoS information. Note that an
interface must be assigned to at least one group as an untagged port.
- Forbidden: Interface is forbidden from automatically joining the
VLAN via GVRP. For more information, see “GVRP” on page 81.
- None: Interface is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the interface.
Console(config)#vlan database
Console(config-vlan)#vlan 5 name R&D media ethernet state
active
active
Console(config-vlan)#