SMC Networks SMC6750L2 Manual De Usuario
C
ONFIGURING
THE
S
WITCH
2-64
Mapping IP Port Priority
You can also map network applications to Class of Service values based on
the IP port number (i.e., TCP/UDP port number) in the frame header.
Some of the more common TCP service ports include: HTTP: 80,
FTP: 21, Telnet: 23 and POP3: 110.
the IP port number (i.e., TCP/UDP port number) in the frame header.
Some of the more common TCP service ports include: HTTP: 80,
FTP: 21, Telnet: 23 and POP3: 110.
Command Attributes
•
IP Port Priority Status – Enables or disables the IP port priority.
•
Interface – Selects the port or trunk interface to which the settings
apply.
apply.
•
IP Port Priority Table – Shows the IP port to CoS map.
•
IP Port Number (TCP/UDP) – Set a new IP port number.
•
Class of Service Value – Sets a CoS value for a new IP port. Note
that “0” represents low priority and “7” represent high priority.
that “0” represents low priority and “7” represent high priority.
Web – Click Priority/IP Port Status. Set IP Port Priority Status to
“Enabled.”
“Enabled.”
Click Priority/IP Port Priority. Select a port or trunk from the Interface
field (note that settings apply to all interfaces). Enter the port number for a
network application in the IP Port Number box and the new CoS value in
the Class of Service box, and then click “Add IP Port.”
field (note that settings apply to all interfaces). Enter the port number for a
network application in the IP Port Number box and the new CoS value in
the Class of Service box, and then click “Add IP Port.”