SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario

1-6

Note: If this is your first time to log into the CLI program, you 

should define new passwords for both default user names 
using the “username” command, record them and put them 
in a safe place.

Passwords can consist of up to eight alphanumeric characters and 
are case sensitive. To prevent unauthorized access to the switch, 
set the passwords as follows:

1. Open the console interface with the default user name and 

password “admin” to access the Privileged Exec level.

2. Type “configure” and press <Enter>.

3. Type “username guest password 0 password,” for the Normal 

Exec level, where password is your new password. Press 
<Enter>.

4. Type “username admin password 0 password,” for the 

Privileged Exec level, where password is your new password. 
Press <Enter>. 

Username: admin
Password:
CLI session with the SMC8624T is opened.
To end the CLI session, enter [Exit].
Console#configure
Console(config)#username guest password 0 [password]
Console(config)#username admin password 0 [password]
Console(config)#

b_mgmt.book  Page 6  Tuesday, July 8, 2003  5:24 PM