SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario

3-48

None

Privileged Exec

Example 

Use this command to display the configuration file stored in 
nonvolatile memory that is used to start up the system.

None

Console#show logging flash
Syslog logging: Disable
History logging in FLASH: level errors
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: enable
REMOTELOG facility type: local use 3
REMOTELOG level type: Warning conditions
REMOTELOG server ip address: 10.1.0.3
REMOTELOG server ip address: 10.1.0.4
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
REMOTELOG server ip address: 0.0.0.0
Console#show logging ram
Syslog logging: Enable
History logging in RAM: level debugging
[3] 0:0:41 1/1/1
   "VLAN 1 link-up notification."
   level: 6, module: 6, function: 1, and event no.: 1
[2] 0:0:41 1/1/1
   "STP topology change notification."
   level: 6, module: 6, function: 1, and event no.: 1
[1] 0:0:12 1/1/1
   "Unit 1, Port  5 link-up notification."
   level: 6, module: 6, function: 1, and event no.: 1
[0] 0:0:11 1/1/1
   "System coldStart notification."
   level: 6, module: 6, function: 1, and event no.: 1
Console#

b_mgmt.book  Page 48  Tuesday, July 8, 2003  5:24 PM