SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario
GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
3-145
Note: Set GVRP timers on all Layer 2 devices connected in the
same network to the same values. Otherwise, GVRP will
not operate successfully.
not operate successfully.
Example
Related Commands
show garp timer
Use this command to show the GARP timers for the selected
interface.
interface.
Syntax
show garp timer [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Console(config)#interface ethernet 1/1
Console(config-if)#garp timer join 100
Console(config-if)#
Console(config-if)#garp timer join 100
Console(config-if)#
b_mgmt.book Page 145 Tuesday, July 8, 2003 5:24 PM