SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario
IGMP S
NOOPING
C
OMMANDS
3-157
Related Commands
ip igmp snooping router-port-expire-time
Use this command to configure the snooping query timeout. Use
the no form of this command to restore the default.
the no form of this command to restore the default.
Syntax
ip igmp snooping router-port-expire-time seconds
no ip igmp snooping router-port-expire-time
no ip igmp snooping router-port-expire-time
seconds - The time the switch waits after the previous
querier stops before it considers the router port (i.e., the
interface which had been receiving query packets) to have
expired. (Range: 300-500)
querier stops before it considers the router port (i.e., the
interface which had been receiving query packets) to have
expired. (Range: 300-500)
Default Setting
300 seconds
Command Mode
Global Configuration
Command Usage
The switch must be using IGMPv2 for this command to take
effect.
effect.
Example
The following shows how to configure the default timeout to 300
seconds:
seconds:
Related Commands
Console(config)#ip igmp snooping query-time-out 300
Console(config)#
Console(config)#
b_mgmt.book Page 157 Tuesday, July 8, 2003 5:24 PM