SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario
B
ASIC
C
ONFIGURATION
2-11
CLI – Specify the hostname, location and contact information.
Setting the IP Address
An IP address may be used for management access to the switch
over your network. By default, the switch uses DHCP to assign IP
settings to VLAN 1 on the switch. If you wish to manually
configure IP settings, you need to change the switch’s
user-specified defaults (IP address 0.0.0.0 and netmask 255.0.0.0)
to values that are compatible with your network. You may also
need to a establish a default gateway between the switch and
management stations that exist on another network segment.
over your network. By default, the switch uses DHCP to assign IP
settings to VLAN 1 on the switch. If you wish to manually
configure IP settings, you need to change the switch’s
user-specified defaults (IP address 0.0.0.0 and netmask 255.0.0.0)
to values that are compatible with your network. You may also
need to a establish a default gateway between the switch and
management stations that exist on another network segment.
Console(config)#hostname Test Switch
Console(config)#snmp-server location TPS - 3rd Floor
Console(config)#snmp-server contact Chris
Console#show system
System description: SMC Networks SMC8612T
System OID string: 1.3.6.1.4.1.1991.1.5.1.1.4.1.1
System information
System Up time: 0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name : Test Switch
System Location : TPS - 3rd Floor
System Contact : Chris
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
System OID string: 1.3.6.1.4.1.1991.1.5.1.1.4.1.1
System information
System Up time: 0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name : Test Switch
System Location : TPS - 3rd Floor
System Contact : Chris
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
--- Performing Power-On Self Tests (POST) ---
UART Loopback Test ..................... PASS
Timer Test ............................. PASS
DRAM Test .............................. PASS
I2C Initialization ..................... PASS
Runtime Image Check .................... PASS
PCI Device Check ....................... PASS
Switch Driver Initialization ........... PASS
Switch Internal Loopback Test .......... PASS
------------------- DONE --------------------
Console#
UART Loopback Test ..................... PASS
Timer Test ............................. PASS
DRAM Test .............................. PASS
I2C Initialization ..................... PASS
Runtime Image Check .................... PASS
PCI Device Check ....................... PASS
Switch Driver Initialization ........... PASS
Switch Internal Loopback Test .......... PASS
------------------- DONE --------------------
Console#
b_mgmt.book Page 11 Tuesday, July 8, 2003 5:24 PM