SMC Networks 10/100/1000 SMCGS8P-Smart Manual De Usuario
A
DDRESS
T
ABLE
S
ETTINGS
2-47
Address Table Settings
Switches store the addresses for all known devices. This
information is used to route traffic directly between the inbound
and outbound ports. All the addresses learned by monitoring
traffic are stored in the dynamic address table. You can also
manually configure static addresses that are bound to a specific
port.
information is used to route traffic directly between the inbound
and outbound ports. All the addresses learned by monitoring
traffic are stored in the dynamic address table. You can also
manually configure static addresses that are bound to a specific
port.
Setting Static Addresses
A static address can be assigned to a specific interface on this
switch. Static addresses are bound to the assigned interface and
will not be moved. When a static address is seen on another
interface, the address will be ignored and will not be written to the
address table.
switch. Static addresses are bound to the assigned interface and
will not be moved. When a static address is seen on another
interface, the address will be ignored and will not be written to the
address table.
Command Usage
Entries specified via the Web interface are permanent. Entries
specified via the CLI can be made permanent or can be set to be
deleted on reset.
specified via the CLI can be made permanent or can be set to be
deleted on reset.
b_mgmt.book Page 47 Tuesday, July 8, 2003 5:24 PM