SMC Networks 1000BASE-X Manual De Usuario

3-5

If you are having difficulties making an out-of-band console connection to 
the serial port on the agent module, you can display or modify the current 
settings for the serial port through the Web agent. Click on the serial port 
icon in the switch image to display or configure these settings, as shown 
below.

Speed Status

Indicates the current port speed.

Duplex Status

Indicates the port’s current duplex mode.

Flow Control Status

Shows the flow control type in use. Flow control can 

eliminate frame loss by “blocking” traffic from end stations 

connected directly to the switch.

VLAN

The VLAN ID assigned to untagged frames received on this 

port. Use the PVID to assign ports to the same untagged 

VLAN.

Baud rate

19200 bps

The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200, and auto 

detection.
Note that when AUTO is selected, you need to 

first press the Enter key once to set the data rate 

and initialize the connection.

Time-Out

10 minutes

If no input is received from the attached device 

after this interval, the current session is 

automatically closed.
Range : 0 - 100 minutes; 0: disabled