Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

 

LOGO! 
Manual, 04/2011, A5E03556174-01 

137

 

LOGO! functions 

4

 

LOGO! provides you with various elements in programming mode, which are organized in 

the following lists: 
●  ↓Co: Connector list (Connector) (Page 138)    
●  ↓GF: List of the basic functions AND, OR, ... (Page 142)    
●  ↓SF: List of the special functions (Page 156) 
●  ↓BN: List of reusable blocks configured in the circuit program 
LOGO! 0BA7 can additionally provide you with the following elements in programming mode, 

if you have previously configured them in your circuit program using LOGO!Soft Comfort: 
●  ↓UDF: List of user-defined function blocks configured in the circuit program 
●  L: A Data Log function block configured in the circuit program     

List contents 

All lists show the elements available in LOGO!. Usually, this includes 

all 

connectors, basic 

functions, and special functions. The ↓BN and ↓UDF lists show all the blocks that you have 

created in LOGO!. 

If not all is shown 

LOGO! does 

not

 show all elements if: 

●  No further blocks may be added. 

This is either an indication of insufficient memory space or that the maximum number of 

blocks has been reached. 

●  A specific block's memory space requirement  (Page 130) would exceed the space 

available in LOGO! 

●  You have not previously configured them (network digital and analog inputs/outputs, UDF 

blocks, and the Data Log block) in the circuit program in LOGO!Soft Comfort and 

downloaded the program to LOGO!.