Siemens 6ED1050-1AA00-0BE8 Manual De Usuario

 

LOGO! 
Manual, 04/2011, A5E03556174-01 

285

 

Data Log (0BA7 only) 

6

 

You can configure a maximum of one Data Log for your circuit program using LOGO!Soft 

Comfort. The Data Log is used to record process measurement variables of the selected 

function blocks. You can add the Data Log instruction to your circuit program as you do with 

a function block.  
If you configured the Data Log for your circuit program, after transferring the program from 

LOGO!Soft Comfort to LOGO!, you can edit the elements connected to the Data Log block. 
For a detailed description of configuration of the Data Log function in LOGO!Soft Comfort, 

refer to the online help for LOGO!Soft Comfort V7.0. From LOGO! 0BA7, you can only 

configure elements connected to the Data Log block.  

Editing elements connected to the Data Log block   

LOGO! shows a Data Log function block with the following display: 

/

 

If your circuit program in LOGO! contains a Data Log block configured from LOGO!Soft 

Comfort, you can edit elements connected to this Data Log as follows: 
1.  Switch to programming mode. Press OK to step into the following display of your circuit 

program: 

84

4

 

2.  Press   to move the cursor until you see "L1" (The Data Log is identified with an L). 

0/