Siemens 6ED1050-1AA00-0BE8 Manual De Usuario
LOGO! installation and wiring
2.2 Installing/removing LOGO!
LOGO!
Manual, 04/2011, A5E03556174-01
Manual, 04/2011, A5E03556174-01
43
Repeat steps 1 to 4 for all other expansion modules.
Note
If you have connected more than one expansion module, it is advisable to start removal with
If you have connected more than one expansion module, it is advisable to start removal with
the last module at the right-hand side.
Make sure the slide interlock of the module to be installed/removed is not engaged in the
Make sure the slide interlock of the module to be installed/removed is not engaged in the
next module.
2.2.2
Wall-mounting
For wall-mounting, first slide the mounting slides on the rear side of the devices towards the
outside. You can now wall-mount LOGO! by means of two mounting slides and two Ø M4
screws (tightening torque 0.8 to 1.2 Nm).
0RXQWLQJVOLGHV