Schneider Electric KVM0108A Manual De Usuario

To change a setting:

1. Double-click or move the highlight bar to the setting, then press [

E

NTER

].

2. After you select an item, a submenu with further choices opens. To make a selection, double-

click it or move the highlight bar to it, then press [

E

NTER

]. An icon appears before the selected 

choice. 

OSD Hotkey

Selects which hotkey activates the OSD function: [

S

CROLL

 L

OCK

] [

S

CROLL

 L

OCK

]; [

C

TRL

] [

C

TRL

] 

or [

A

LT

] [

A

LT

]. 

Since the [

C

TR

l] or [

A

LT

] key combinations may conflict with programs running on the computers, 

the default is the [

S

CROLL

 L

OCK

] combination.

Port ID Display 
Position

Location of the port ID on the monitor. The default is the upper left corner. To change the location: 
Use the mouse or the arrow keys plus 

P

AGE

 U

P

, 

P

AGE

 D

OWN

, 

H

OME

, 

E

ND

, and 5 (on the numeric 

keypad with 

N

UM

 L

OCK

 off), to position the port ID display, then press [

E

NTER

] to lock the position 

and return to the Set submenu.
Note: The setting affects the currently selected port. Change the setting for each port individually.

Port ID Display 
Duration

Determines how long a port ID displays on the monitor after a port change has taken place. There 
are two choices: 3 seconds and Off.

Port ID Display 
Mode

Selects how the port ID is displayed: the port number alone (PORT NUMBER), the port name alone 
(PORT NAME), or the port number plus the port name (PORT NUMBER + PORT NAME). 
The default is PORT NUMBER + PORT NAME.

Scan Duration

Determines how long the focus dwells on each port as it cycles through the selected ports in Auto 
Scan mode. Enter a value from 1-255 seconds, then press [

E

NTER

]. 

The default is 5 seconds. A setting of 0 (zero) disables the Scan function.

Scan/Skip Mode

Selects which computers will be accessed under Skip mode, and Auto Scan mode. Choices are:
• ALL - All the ports which have been set Accessible 
• QUICK VIEW - Only those ports which have been set Accessible and selected as Quick View 

Ports 

• POWERED ON - Only ports which have been set Accessible and are Powered On;
• QUICK VIEW + POWERED ON - Only those ports which have been set Accessible, selected as 

Quick View Ports, are Powered On. 

The default is ALL.

Screenblanker

If there is no input from the console for the amount of time set with this function, the screen 
becomes blank. Enter a value from 1-30 minutes, then press [

E

NTER

]. A setting of 0 (zero) disables 

the function. The default is OFF.

Hotkey Command 
Mode

Enables / Disables the Hotkey function (see “Hotkey Operation” on page 22), in case a conflict with 
programs running on the computers occurs. The default is ON.

Hotkey

Selects the Hotkey invocation keys (see“Hotkey Operation” on page 22). Choices are 

[NUM LOCK] 

+ [-], 

OR

 [CTRL] + [F12]

. 

The default is 

[NUM LOCK] + [-]

.

Set OSD Language Sets the language for the OSD display. The default is English.
Set Console 
Keyboard

Sets the keyboard language mapping of the console keyboard. The default is Auto. If the switch 
does not automatically receive language mapping from the keyboard, it will set to English (US).

Set Logout 
Timeout

If there is no input from the console for the amount of time set with this function, the operator is 
automatically logged out. A login is necessary before the console can be used again. This enables 
other operators to gain access to the computers when the original operator is no longer accessing 
them, but has forgotten to log out. To set the timeout value, enter a number from 1-180 minutes, 
then press [

E

NTER

]. If the number is 0 (zero), this function is disabled. Default is Off.

Note: This feature does not function if Set Login Mode is disabled (see page 19).