Schneider Electric KVM0108A Manual De Usuario

5. Scroll down to “Firmware Upgrade.” Press 

[E

NTER

]

, then press 

[Y]

 (Yes) to start the Firmware 

Upgrade mode.

Note: 1. The upgrade to the KVM Adapter Cables takes place through the Cat 5e/6 
cable that connects the adapter cable to the KVM switch, so there is no separate 
firmware upgrade cable to attach. 
2. Adapter cable firmware selected with the upgrade utility will upgrade in a single 
session all connected adapter cable models that match the firmware type.

6. Or, scroll down to “Adapter Upgrade”. Press 

[E

NTER

}

, then press 

[Y]

 to start the Firmware 

Upgrade mode for Adapter Cables only. 

To upgrade your firmware:

1. To run the downloaded Firmware Upgrade Package file, double click the file icon, or open a 

command line and enter the full path to it. 

2. The Utility checks to make sure the KVM switch is in the Firmware Upgrade Mode and then lists 

all needed firmware preselected in the Device List panel.

Note: 1. The Device List lists all KVM Server Modules that require upgrading. 
2. If the Utility fails to list any firmware, check that the KVM switch is connected and 
in the Firmware Upgrade Mode. The Firmware Package may be corrupted or the 
wrong version. Obtain a new copy of the file and retry.

3. Select MAIN to upgrade the firmware for the Main Board. Deselect any KVM Server Modules 

that will not be upgraded. After making your selection(s), click Next to perform the upgrade.