Sony 4-296-436-11 (2) Manual De Usuario
II-57
Message List
Ap
pend
pend
ix
Information
ID
Message
Solution
1101
The setting is changed.
Perform "Startup Define", and then
restart.
Perform "Startup Define", and then
restart.
This appears when you change the system format or 3D mode, or
when the system otherwise needs to be restarted.
Execute [Startup Define], and restart the unit.
when the system otherwise needs to be restarted.
Execute [Startup Define], and restart the unit.
1102
Finished. Please restart.
M: xx/B: xx/F: xx/R: xx/Font: xx
FPGA1: xx/2: xx/3: xx/4: xx
M: xx/B: xx/F: xx/R: xx/Font: xx
FPGA1: xx/2: xx/3: xx/4: xx
M: Main
B: Boot
F: Firmware
R: Register
Font: Font
B: Boot
F: Firmware
R: Register
Font: Font
xx:
• "O": OK
• "E": Error
• "–": Not installed
• "E": Error
• "–": Not installed
This appears to display the results after installation of application
software and firmware is complete.
If “E” (error) appears, try installing again. If the problem persists,
contact your local Sony representative.
software and firmware is complete.
If “E” (error) appears, try installing again. If the problem persists,
contact your local Sony representative.
1103
Import Finished. Please restart.
This appears when import of a configuration file is complete. Restart
the unit.
the unit.