Sun Microsystems 816-0830-12 Manual De Usuario
41
C H A P T E R
4
Hardware Installation
This chapter describes how to mount the switch in an expansion cabinet, install the
vent panel, and connect the switch to your disk arrays. This chapter is arranged as
follows:
vent panel, and connect the switch to your disk arrays. This chapter is arranged as
follows:
Preparing for the Installation
Before you begin installing the switch:
■
Refer to the Rackmount Placement Matrix, available on the Sun Microsystems web
site for hole positions in an expansion cabinet.
site for hole positions in an expansion cabinet.
http://www.sun.com/products-n-solutions/hardware/docs/
Network_Storage_Solutions/Cabinets_and_Enclosures/index.html
Network_Storage_Solutions/Cabinets_and_Enclosures/index.html
■
If you currently have a hub installed in your expansion cabinet, you must remove
it, and the mounting tray, prior to installing the switch and mounting rails. Refer
to the hub removal instructions in the Sun StorEdge FC-100 Hub Installation and
Service Manual, which is packaged with the hub.
it, and the mounting tray, prior to installing the switch and mounting rails. Refer
to the hub removal instructions in the Sun StorEdge FC-100 Hub Installation and
Service Manual, which is packaged with the hub.