GarrettCom PS14P Manual De Usuario

S14 & PS14P (PoE) Convenient Switches   Installation and User Guide (01/06)  

 
 52

.

.

 

This section describes the proper 

connection of the -48VDC leads (or 24VDC, 

12VDC leads) to the Direct DC power terminal 

block on the Magnum S14H hardened media 

converter (as shown in Figure above). The DC 

terminal block on the Magnum S14H is located 

on the left side of the unit and is equipped with 

three (3) screw-down lead posts. The power 

terminals are identified as positive (+) and negative (-), and they are floating inside the unit 

so that the user if desired may ground either of the terminals.  The chassis is “earth” or 

ground (GND).