GarrettCom 6K32 Manual De Usuario

Magnum 6K32 Managed Switch            Installation and User Guide (02/05) 

 

40 

.

.

 

 
5.2 

An important feature of the Magnum 6K32 is the use of one Port 

Modules for flexible mixed-media connectivity to RJ-45 and fiber media in the 

modular slot. Since the Magnum 6K32 Switches have dual-speed capability for 

copper ports, the 6 or 8-port interfaces are designed to support all standard 

Ethernet media types at 10 or 100Mps speed.  Each 6K32 PM can provide two, 

four, six or eight ports for connecting Ethernet segments with its individual 

connector type and media. 

For a list of 6K32 Port Module types, refer to Section 1.2    

Each 6K PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) as other ports. 

 
 
5.2.1  

 

The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at 

10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-

mode ST-type connectors and 

dual speed copper ports. The 

ST-connector functions as a 

fiber optic transceiver to 

support 100BASE-FX network 

segments. When installed in a 

Magnum 6K32 Managed 

Switch, the copper port 

supports the standard distance 

100m on each port and the fiber 

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, 

i.e., typically 2km at full-duplex and 412m at half-duplex. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and  

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 

 

4