GarrettCom 6K32TRC Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

73

 

 

.

.

lead from 48V  or –48V supply must be connected to the post labeled “+”. 
 
 

The connection procedure is straightforward. Simply connect the DC leads to 

the Switch’s power terminals, positive (+) and negative (-) screws. Ensure that each lead 
is securely tightened.  
 

The 24VDC and 125VDC terminal block on Magnum 6K32T & 6K32TRC’s is 

similar to that described in the –48VDC information above.

 

The following must be adhered to in order to conform to UL requirements: 

1.   Minimum 18 AWG cable for connection to a Centralized DC power source. 
2.   Minimum 14 AWG cable for connection to earthing wiring. 
3.   Use only with Listed 10 A circuit breaker provided in building installation. 
4.   “Complies with FDA radiation performance standards, 21 CFR subchapter J.” 

or equivalent. 

5.   Fastening torque of the lugs on the terminal block:  9 inch pound max. 
6.   Centralized DC Power Source cable securement, use at least four Minimum 14 

AWG cable ties to secure the cable to the rack at least 4 inches apart with the 
first one located within 6 inches of the terminal block. 

To order the optional Dual-Source -48VDC power supply factory installed, 
order “Dual-Src48V” as a separate line item following the product model. 

 

    Example: Magnum 6K32T & 6K32TRC-48VDC  

 

 

  Dual-Src-48V   for the regular DS model with no ON-OFF switch 

 

             or    Dual-Src48V-SWITCH   with the ON-OFF manual switch. 

Similarly, order the “Dual –source 24VDC” or “Dual-source 125VDC” as a 
separate line item following the product model.  

  

Example: 

for regular models with no ON-OFF switch 

Or Dual-Src125V-Switch for models with the ON-OFF switch 

   

 Operation of the Dual-Source Magnum 6Ks-48VDC, 24VDC and 125VDC 
Switch models are identical to that of the standard models.