GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   03/06) 

 

11

.

.

and controlled via hardware or software trap controls. The options for universal AC and 

24V/-48V/125VDC power options offer a widely accepted managed switch with high 

reliability. 

fiber 
 

 

In an eight-port SFF fiber port module, all of the fiber ports are of the same 

speed (100Mb), mode, and connector type. Models available with Small Form Factor 

(SFF) are multi-mode MT-RJ or LC-type connectors, and single-mode LC-type 

connectors.  

The 100Mb fiber eight-port 

modules for the Magnum 6K8-Series 

normally are set (factory default) to 

operate in full-duplex mode for best 

fiber distance and performance. Using 

the 6K-MNS software, the user may 

select full- or half-duplex mode per-port through set-up of the software (See Magnum 

6K-MNS Software Manual) for the flexibility to adapt to any FDX or HDX type of Fast 

Ethernet devices).  

There are three LED’s per fiber port. The Link (LK) LED indicates “ready for 
operation” on that port when lit, the F/H LED indicates operation in full-duplex 
mode when ON (half-duplex when OFF), and the blinking ACT LED indicates 
receiving Activity on the port. A fiber cable must be connected into a SFF port 
and the Link (LK) indicator for that port must be ON (indicating there is a 
powered-up device at the other end of the cable) in order for a LK LED to 
provide valid indications of operating conditions on that port. 
 
 

ACT

F/H

ACT

F/H
ACT

F/H

ACT

F/H

ACT

F/H

ACT

 

F/H

 

ACT

 

F/H

 

ACT

 

F/H

 

ACT

 

F/H