GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   03/06) 

 

27

.

.

The DIN-Rail mounting brackets 

and latches are optional and need to be 
ordered as separate items, e.g Model # DIN-
RAIL-6K8 

Magnum 6K8 Din-Rail kit comes along 
with the following-

BOM: 

1 

1 

    DIN Rail Clip assy 

2 

2 

    #10-32 x ¼ Phillip  

 

    Flat head screws with 

undercut 
3 

8 

    #4-40 x 3/8 Phillip Flat head screw 

 
Din-Rail kit Installation procedures: 

 

1. Remove the back plate from Magnum 6K8 UNIT 

a. There are eight screws along the edge of  the unit to remove. 

b.. Do not re-use the old screws. 

 

2. On the back-plate 

a. Locate the indented side with 1, 11…… 

b. “1” indentation signify center of the mounted Din-Rail clip  

location.

 

c. Each indented locations (1-11-111…) are ½ inches apart from the center. 

 

 
Fig 1. 
 
3. 

Select the height position via 

indented side marking .

 

 
4. Place the 

DIN Rail Clip 

assembly under indented side of 
the plate. Place two of the screws, 
came along the kit (#10-32 x ¼ 
Phillip Flat head screws with 
undercut) onto the indented side 
and screw tight the assembly as 
shown in Fig 2a.  
Note: Make sure the screws must 
have the 5lbs/in torque minimum.