GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   03/06) 

 

36

.

.

Step 5.   Once the latching connectors are aligned properly and the mounting holes are 

aligned with stand offs then press slowly and firmly with two fingers (as shown 

below in Fig. 3.6.2f) 
on the top of the 
latching connectors 
until the connectors 
latched up securely. 

Step 6.   Now screw down the daughter board with 6 #440 screws, 

so that it holds the daughter board securely. The figure on 

the left shows the top view of successfully installed 

6KPMV cards inside and the Power Led(pin J5) and 

Power supply cable(pin DSSV) connected to the board 

pins as shown in Fig 3.6.2g with arrows. 

Fig. 3.6.2g   Top View: 6KPM Module 

Step 7.    Once the installation of granddaughter and 

daughter modules is done, the front panel 

screen plates of 6KPMV need to be placed 

on the face of the module securely and carefully. Now screw down properly the 

J5

DSSV