GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   03/06) 

 

53

.

.

ACT

F/H

ACT

F/H

 

feature eliminates the need for a special twisted pair crossover cable when connecting to 

a hub or another switch. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, a 

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a 

“10/100” LED indicating 100Mb when lit (or 10 Mbps when off). 

Important Note:  The 10/100 RJ-45 ports are supported with Auto-negotiation and 

Auto-crossover (MDIX), which allow the RJ-45 ports to automatically Link with any RJ-

45 device and eliminate the use of cross-over cable.  

The Magnum 6KP8-

45-2MT eight port Module is a 

combo module with copper and 

fiber (Small Form Factor) 

MTRJ type ports. The small 

sizes of MTRJ connectors give 

an advantage of placing more 

fiber ports on one module. The 

6KP8-45-2MT is equipped with 

six 10/100 RJ-45 ports and two 

100Mb MTRJ fiber ports. When installed in a Magnum 6K8-Series Switch, it supports 

the standard distances as mentioned on 5.2.3. and the LEDs also act similarly.  

The Magnum 6KP8-45SLC eight port Module is a combo module with copper 

and fiber (Small Form Factor) LC type fiber ports.