GarrettCom 6K8 Manual De Usuario

Magnum 6K8-Series Industrial Field Switch             Installation and User Guide   03/06) 

 

4

.

.

 DC Power Supply (Options) 

-48VDC Power Input Voltage : -36 to -70 VDC  
 24VDC Power Input Voltage : 18 to 36VDC 
125VDC Power Input Voltage : 88 to 300VDC 
5VDC Power Input Voltage : (+) or (-) 5% 
Std. Terminal Block :   “ -, GND, + ” 
Power Consumption: same as for AC models, see above 
 

For DC internal power supplies at –48VDC, 24VDC and 125VDC, 
including Dual Source options (

for continuity of operation when either of the 

DC input sources are interrupted)

, see Appendices B and C.

 

The copper daughter board has MDI-MDIX Auto-crossover on all the RJ-45 
ports., and eliminate the use of cross-over cable between the devices. Also 
port-specific user settings (such as FDX or HDX, copper 10/100 speed) can 
be fixed using software commands. 

 

 

 

 Vertical mounting only Suitable for wall or DIN-Rail mounting  

 

UL listed (UL60950), cU, CE 

 

 

Emissions meet FCC Part 15 Class A 

 

 

IEEE P1613 Environmental Standard for Electric Power Substations 

 

 

 
IEEE 61850 EMC and Operating Conditions, class C for Electric Power   
Substations 

        NEMA TS-2 and TEES for traffic control equipment 

 

 

 

Note: These products are tested and approved under IEC61850 for use in Class 
C sheltered locations where neither temperature nor humidity are controlled. 
The equipment needs to be protected against solar radiation, rainfall, other 
precipitations and wind. UL has not approved these products for Annex-T 
outdoor use. 

Three years, per UL 60950 temperature rating 

Made in USA 

  

 

 

 

 Email 

 for details.