GarrettCom 84-00136 Manual De Usuario

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)

 

 

45

.

.

 
5.0 

This chapter describes each Port Module (PM), including appearance, 

functionality, and status displays. 

This section applies only to PMs shipped as separate items, i.e., 6K16/6K16V 

PMs not factory installed in a Magnum 6K16/6K16V PM slot. 

 

 

Examine the shipping container for obvious damage prior to 

installing a 6K16/6K16V PM; notify the carrier of any damage you believe 

occurred during shipment or delivery.  Inspect the contents of this package for 

any signs of damage and ensure that the items listed below are included. 

 

This package should contain: 

1 or more 6K16-Series (6K16 or 6K16V) PMs 

Installation instructions, with illustrations 

 

   

Remove the 6K16-Series PM(s) from the shipping container. Be sure 

to keep the shipping container should you need to ship any of the PMs 

separately at a later date. In the event there are items missing or damaged, 

contact your supplier. If you need to return the unit, use the original shipping 

container if possible. Refer to Chapter 5 for specific return procedures. 

An important feature of the Magnum 6K16-Series is the use of Port Modules for flexible 

mixed-media connectivity to RJ-45 and fiber media. Since the Magnum 6K16-

Series Switches have dual-speed capability for copper ports, the 2, 4, 6 or 8-port 

interfaces are designed to support all standard Ethernet media types at 10 or 100 

or 1000Mps speed.  Each 6K16-Series PM provides a wide selection of 

connecting Ethernet media segments with all similar or combo connector type. 

Each 6K16-Series PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) other user ports.