GarrettCom 84-00136 Manual De Usuario

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)

 

 

54

.

.

ACT

F/H

ACT

F/H

 

port. 

• 

For non-PoE devices connected, the PoE port will act as a normal RJ-45 port 
and the PoE LED is OFF.  No power is being sent out from the port. 

• 

The PoE ports in Magnum 6K’s with 48VDC power input act as a pass-
through, so the 48VDC power source must be strong enough to provide power 
to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to 
15 watts per PoE port). 

• 

In the case where the 48VDC power in not internally connected and no power 
is coming to the PoE ports for some reason, all the PoE port LEDs are ON 
simultaneously to indicate a trouble condition. The ports will still operate 
properly for data traffic. 

The Magnum 6KP8-

45-2MT eight port Module is a 

combo module with copper and 

fiber (Small Form Factor) 

MTRJ type ports. The small 

sizes of MTRJ connectors give 

an advantage of placing more 

fiber ports on one module. The 

6KP8-45-2MT is equipped with 

six 10/100 RJ-45 ports and two 

100Mb MTRJ fiber ports. When installed in a Magnum 6K16-Series Switch, it supports 

the standard distances as mentioned on 5.2.3. and the LEDs also act similarly.  

The Magnum 6KP8-45SLC eight port Module is a combo module with copper 

and fiber (Small Form Factor) LC type fiber ports.  

The small size of  LC connectors 

give an advantage of placing more 

ports on one module. The 6KP8-

45-2SLC is equipped with 6 

10/100 RJ-45 ports and 2 Single-

mode fiber ports. 

 

 

ACT

F/H

ACT

F/H