GarrettCom ES42 Manual De Usuario

ES42 Series Edge Switches 

 Installation and User Guide (05/05)  

 

 

This section describes the proper connection 

of the -48VDC leads (or 24VDC, 12VDC leads) to the 

DC power terminal block on the Magnum ES42H Edge 

Switch (as shown in the Figure). The DC terminal block 

on the Magnum ES42H is located on the left side of the 

unit and is equipped with three (3) screw-down lead 

posts. The power terminals are identified as positive (+) 

and negative (-), and they are floating inside the unit so 

that either of the terminals may be grounded by the user 

if desired.  The chassis is “earth” or ground (GND). The 

connection procedure is straightforward. Simply insert 

 

47 

.

.