GarrettCom 6K25 Manual De Usuario

Magnum 6K25 Managed Fiber Switch            Installation and User Guide (04/06) 

 

52 

.

.

mode fiber ports. 

When installed in a Magnum 6K25 Switch, it supports the standard distances as 

mentioned on 5.2.4. and the LEDs also act similarly. 

The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector 

equipped with SC type connectors and can be easily snapped in and out. The Gigabit 

fiber ports are most popular as server-to-switch and switch-to-switch applications. It 

supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 

550m at full duplex.                                                                                                                            

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver 

(take care to insert it the right way up, arrows on top) until it clicks in space. While 

removing the transceiver, press the clips on either side of the transceiver at the same time 

and pull the transceiver out. 

Each port has an Activity (ACT) LED indicating packets being received and a 

Link (LK) LED indicating proper connectivity with the remote device when lit. 

The Magnum GBIC-LXSC/ZXSC is a single-mode Gigabit fiber connector 

equipped with SC type connectors and can be easily snapped in and out. The Gigabit 

fiber ports are most popular as server-to-switch and switch-to-switch applications. It 

supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 

10,25, 40 or 70Km at full duplex, and depend upon the Gigabit modules used.            

Each port has an Activity (ACT) LED indicating packets being received and a link (LK) 

LED indicating proper connectivity with the remote device when lit.   

5.2.14 6KM-BLNK 

 

The 6KM-BLNK is a blank face plate or cover plate that must be installed in 

any empty 6K25 PM slot to 

maintain proper cooling air 

flow, safety, etc. 

 Two 

screws 

underneath the front panel hold 

the 6KM-BLNK in place.