GarrettCom 4K-Series Manual De Usuario

Magnum 4K8 Switches      Installation and User Guide      (10/04) 

 

11 

.

.

 

„  100Mb switching services for large, high performance Ethernet LANs 
 

Magnum 4K8 Switches provide Fast Ethernet switching on all ports.  

They perform high speed filter/forward operations on the traffic, giving 

each port’s segment a full 100Mb (or 10 Mb) of bandwidth.  

„  Option to configure a  fiber port (port 9), all fiber connector types 
 

Fiber port modules are available with 100Mb mm ST, SC, VF-45, MTRJ 

single-mode SC, and 10 Mb ST-type connectors.  The configuration of the 

fiber port, in the factory or in the field, allows the 4K8 Switches to adapt 

to mixed and changing fiber types in any application. 

„  Manual Switch “F-H” for user configurable 
 

The Manual switch “F-H” allows the user to setup port#9(fiber port) as 

per their convenience to 100Mbps full-duplex at “F” and half- duplex at 

“H” mode by sliding the manual switch under the FPM Port.  

 

„  Eight RJ-45 (copper) ports, 10/100 auto-negotiation 
 

RJ-45 ports provide twisted pair segment connections, with N-way auto-

negotiation per port and full and half manual settings for optional port.  

„  Full-duplex or Half-duplex operation, auto-sensing 
 

All fiber and RJ-45 (copper) ports are capable of half- or full-duplex, 

individually selected.  All RJ-45 ports support 10/100 auto-negotiation.  

„  Rack-mounting may be std or “reverse”,19 inch, ETSI or 23” Telco 
 

The standard rack mounting provides Ethernet ports and status LEDs in 

front, service connections (power input and Ethernet cables) in the rear. 

“Reverse” rack mounting provides status LEDs in front and all cabling 

connections in the rear.  Standard 19’ rack mount brackets are included, 

while ETSI and 23” Telco are optional. 

„  Plug-and-Play installation for high performance switching 

 

 

Magnum 4K8 Switches are self-learning for node addresses. They  

 

 

can be placed into operation without complex set-up procedures,  

 

 

even in large networks.  They operate transparent to system software. 

„  Standard AC power input, -48VDC, 24VDC, or 125VDC is available 

 

Standard AC power input is IEC plug, auto-ranging for worldwide use. For 

special applications, models with –48VDC, 24VDC, or 125VDC are 

available.  Dual source DC input can also be selected and configured on the 

–48VDC, 24VDC, and 125VDC input models. 

 

„  Extended Temperature Operation 

The Magnum 4K8 has been tested for operation at temperatures of –5’C to 

55’C.  NEBS-certified models have been tested to a greater range per 

NEBS Level 3 requirements.  For details, email mktg@garrettcom.com