GarrettCom 6K25e Manual De Usuario

Magnum 6K25e Gigabit Fiber Switch            Installation and User Guide (10/07) 

 

32 

.

.

Up to four front-mounted 6KPM cards may be installed in one Magnum 6K25e 

Managed Fiber Switch unit. Follow these steps to install a 6KPM. 

Step 1.  Remove top chassis cover. See procedure in Section 3.5.1 above.  

Step 2.  Placed Granddaughter board (as shown in fig. 3.5.2a and 3.5.2b) on the chassis 

built in stand off (female) provided at the front of the 6K25e Main Board and 

screw down tightly with the three 5/16 stand-off (male) on the top of the 

Granddaughter board The 5/16 stand off has been used to place the daughter 

board on the top of the granddaughter board and latch it securely. 

 

Step 3.    The figure here illustrates the basic layout of an individual PM card. Each 

6KPM card fits into the space provided on the main board.