GarrettCom 6K25e Manual De Usuario

Magnum 6K25e Gigabit Fiber Switch            Installation and User Guide (10/07) 

 

43 

.

.

This section applies only to PMs shipped as separate items, i.e., 6K25e PMs 

not factory installed in a Magnum 6K25e PM slot. 

 

 

Examine the shipping container for obvious damage prior to 

installing a 6K25e PM; notify the carrier of any damage you believe occurred 

during shipment or delivery.  Inspect the contents of this package for any signs 

of damage and ensure that the items listed below are included. 

 

This package should contain: 

1 or more 6K25e PMs 

Installation instructions, with illustrations 

 

   

Remove the 6K25e PM(s) from the shipping container. Be sure to 

keep the shipping container should you need to ship any of the PMs separately 

at a later date. In the event there are items missing or damaged, contact your 

supplier. If you need to return the unit, use the original shipping container if 

possible. Refer to Chapter 5 for specific return procedures. 

An important feature of the Magnum 6K25e is the use of  Port 

Modules for flexible mixed-media connectivity to RJ-45 and fiber media. Since 

the Magnum 6K25e Switches have dual-speed capability for copper ports, the 6 

or 8-port interfaces are designed to support all standard Ethernet media types at 

10 or 100Mps speed.  Each 6K25e PM provides six or eight ports for 

connecting Ethernet segments with its individual connector type and media. 

For a list of 6K25e Port Module types, refer to Section 1.2    

Each 6K25e PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) other user ports.