GarrettCom 6K25e Manual De Usuario

Magnum 6K25e Gigabit Fiber Switch            Installation and User Guide (10/07) 

 

48 

.

.

proper connectivity with the remote device when lit, and a FDX/HDX LED indicating 

full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the 

speed for the copper port, which is 10Mbps when the LED is ON and 10 Mb  when the 

LED is OFF.  

 

Magnum 6KP8-MTRJ is a multi-mode fiber optic 8-port module equipped with 

a small-form-factor MTRJ-type 

connector. It looks almost like 

an RJ-45 port, but it is black in 

color. The MT-RJ’s small size 

and ease of connection make it 

a good choice for 100Mbps 

“fiber-to-the-desktop” Ethernet 

connectivity. When installed in 

a Magnum 6K25e Switch, it 

supports fiber optic cable 

distances up the IEEE-standard 

100Mbps distance limits, i.e., 

typically 2km at full-duplex and 412m at half-duplex. 

 

The functionality of this 100BASE-FX multi-mode 8 Port module is essentially 

the same as the ST and SC-types. It has the same LEDs per port indicating port activity 

(ACT), Link (LK), and FDX or HDX operation. 

 

The 6KP6-RJ10ST is a combo module with two different kinds of fiber flavor 

with two different speeds. The top four ports of MTRJ Small form factor fiber support at 

100Mb full-duplex, whereas the bottom two ports multi-mode ST-Fiber support 10Mb 

half-duplex. This combo module provides more flexibility to the user to connect their 

legacy 10Mb fiber as well as 100Mb to the Magnum 6K25e Switch.   

 

When installed in a Magnum 6K25e Switch, the 100Mb MTRJ connector 

supports fiber optic cable distances up to the IEEE-standard 100Mbps distance limits, 

i.e., typically 2km at full-duplex and 412m at half-duplex. The 10Mb Multi-mode ST-

 

 

ACT

F/H

ACT

F/H
ACT

F/H

ACT

F/H

ACT

F/H