GarrettCom DS8016 Manual De Usuario

Magnum DS8016 Dual-Speed Stackable Hubs        Installation and User Guide (07/06) 

 

26 

.

.

 

:   Illuminates GREEN to indicate AC power is applied to the unit. 

 

   

:  Red LED Blinks intermittently when a collision occurs. 

 

 BR              :   Bridge Module Indicator, On when 10/100 bridge module is 

installed  (Model DS8016-B), Off when no bridge module is inside  
(DS8016A) 

 

 

                100/Auto    :  Speed LED per port.  Steady On when speed is 100Mbps , Off when 

speed is 10Mb, flashing when auto-negotiating or when not 
connected (no LINK) 

                 LK/RX      :  Activity LED per port. Steady On when twisted-pair link is  
 

 

 

  operational.  Activity, flashing when port is receiving data. 

 

 

 

Magnum DS8016s each have one Up-link port, port # 1X, which can be used 

when port #1 is not connected. The Up-link port allows repeater-to-repeater connections 

without a special cross-over cable.  It works the same for 10Mb or 100Mb connections.   

Use port “1”  (or ports 2 thru 16) for straight-through twisted pair cabling from 

the DS8016 port to a user device, or the “1X”  port for cross-over or up-link segment 

connections from the first DS8016 port to a repeater or hub or switch. Verify proper port 

connection by noting the port’s LINK/RX status, which is illuminated when a proper link 

is made and blinking when there is activity.  

 

Only one of these ports, either # 1 or # 1X may be used at one time simultaneously.