GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch Installation and User Guide 05/07)

www GarrettCom com

to its compact, hot pluggable characteristics, SFPs are becoming a very popular choice

for various applications. The small-chassis Magnum 6K is designed for industry-standard

Gb-SFPs and Gb-SFPCU (copper) for user selection of the SFP gigabit media type as

desired.

All SFPs used in Magnum 6Ks are compliant with the industry standard Multi-Source

Agreement (MSA) ensuring compatibility with a wide range of networking kit.

Side View

---Duplex LC connector -- Front view

Note: It is highly recommended to remove the fiber cable first before removing the SFP

transceiver for any reason. Not removing the fiber cable first can damage the fiber cable,

cable connector or optical interfaces. It is advised not to remove and insert a SFP

transceiver frequently as this may shorten its useful life.

Note: Always use an ESD wrist strap while handling the SFP transceivers since the

SFP modules are static sensitive devices.

Note: The copper 1000BASE-T SFP transceiver port supports 1000Mb only. It is

recommended to use a straight-through RJ-45(4-twisted pair) connection while

connecting to any Server/workstation. While connecting with any Switch/repeater or

other device, it is recommended to use Crossover RJ-45 (4-twisted pair) category 5 or

higher cabling. The maximum length supported on copper 1000BASE-T is 100mts (328

ft.).

Bail clasp