GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

44

 

 

.

.

connectors  as shown in Fig. 3.5.3b .  If the now empty slot is to remain unused, be sure 

to install a 6KPM-BLNK face plate cover.                       

 

 
Follow the step 8 to complete the process successfully.  
 
NOTE:1. If the modular slot has not being used and moved to other unit, the empty 
slot must be covered with Blank cover, to maintain proper air-inflow inside the unit 
and keep off from dust and other unavoidable substance, otherwise can cause a failure 
in the Switch. 
2. If the PM module in the modular slot is not being installed properly or loose in 
connection, the MNS-6K management software will not boot-up properly and a error 
will generate as –{ failed to read register device type (offset 0x1600) on slot “A or B or 
C or D”}, whichever the slot has been used. 
3. Always boot-up the Switch after any new module installation on modular slot to 
confirm the successful installation, before placing the chassis cover. 

 
3.6 

 
Use a DB-9 “null modem” cable to connect the Magnum 6K32T & 6K32TRC 
Console Port (the RS-232 port on the 6K32T & 6K32TRC Switch) to the your 
PC, so that your PC becomes the 6K32T & 6K32TRC’s Console Terminal.   
Note: The DB-9 cable does not include with the 6K32T & 6K32TRC 
unit package. 

 

 
 

 
 

 

 

 
 
 

 

t 

O

OF

PORT