GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

50

 

 

.

.

This section applies only to PMs shipped as separate items, i.e., 6K32T & 

6K32TRC PMs not factory installed in a Magnum 6K32T & 6K32TRC 

modular slot. 

 

 

Examine the shipping container for obvious damage prior to 

installing a 6K32T & 6K32TRC PM; notify the carrier of any damage you 

believe occurred during shipment or delivery.  Inspect the contents of this 

package for any signs of damage and ensure that the items listed below are 

included. 

 

This package should contain: 

6K32T & 6K32TRC PMs 

Installation instructions, with illustrations 

 

   

Remove the 6K32T & 6K32TRC PM(s) from the shipping container. 

Be sure to keep the shipping container should you need to ship any of the PMs 

separately at a later date. In the event there are items missing or damaged, 

contact your supplier. If you need to return the unit, use the original shipping 

container if possible. Refer to Chapter 5 for specific return procedures. 

 
5.2 

An important feature of the Magnum 6K32T & 6K32TRC is the use 

of one Port Modules for flexible mixed-media connectivity to RJ-45 and fiber 

media in the modular slot. Since the Magnum 6K32T & 6K32TRC Switches 

have dual-speed capability for copper ports, the 6 or 8-port interfaces are 

designed to support all standard Ethernet media types at 10 or 100Mps speed.  

Each 6K32T & 6K32TRC PM can provide two, four, six or eight ports for 

connecting Ethernet segments with its individual connector type and media. 

     For a list of 6K32T & 6K32TRC Port Module types, refer to Section 1.2 

  

Each 6K PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) as other ports.