GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

53

 

 

.

.

connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and 100Mb 

Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their 

legacy 10Mb network to the Magnum 6K32T & 6K32TRC switch. They also provide a 

convenient way for the half duplex hub to connect to the switch through 10Mb fiber 

ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of  Switch 

devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for 

multi-mode fiber. (Single-mode for 10Km distance may be available as a special order). 

 

 

Each port has an Activity (ACT) LED indicating packets being 

received, a Link (LK) LED indicating proper connectivity with the remote device when 

lit, and  FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off). 

 
5.2.2. 6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC 
 

The Magnum 6KP6-

RJMSC is also a Combo 6 Port 

module equipped with 4 10/100Mb 

RJ-45 ports along with 2 multi-

mode 100Mbps fiber optic 

transceivers all in one module.  This 

is similar to the 6K6-RJMST. It has 

the same LEDs indicating port 

activity (ACT), Link (LK), and 

FDX / HDX and 10/100 operation, and the same face-plate lettering.  

While the functionality of these two modules is essentially the same, the 6KP6-

RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type. 

 

 

4