GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

4

 

 

.

.

Fuse Required – 2Amps 
 24VDC Power Input Voltage : 20 to 40VDC 
Fuse Required – 3Amps 
125VDC Power and 100VDC Input Voltage : 88 to 300VDC 
Fuse Required – 1Amps 
Std. Terminal Block :   “ -, GND, + ” 
Power Consumption: same as for AC models, see above 

Warning- All the fuse replacment must be replaced with same value. 

For (Optional) DC internal power supplies at –48VDC, 24VDC and 125VDC, 
including Dual Source options (

for continuity of operation when either of the DC 

input sources are interrupted)

, see Appendices B and C. 

6K32T/ 6K32TR(Reverse)- Fan cooled (3 fans inside) 

 

6K32TRC-  Convection cooled (No fans) Static Thermal design techniques 

The Alarm Contact option is offered as a configuration option.

 

The alarms can be 

initiated through two normally closed Form-C contacts, one loss of power alarm 
and one software alarm through user selectable software traps. 

The copper daughter board has MDI-MDIX Auto-crossover on all the RJ-45 
ports., and eliminate the use of cross-over cable between the devices. Also 
port-specific user settings (such as FDX or HDX, copper 10/100 speed) can 
be fixed using software commands. 

 

 

UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A 

 

 

NEBS L3 and ETSI Compliant, NEMA TS-2 for traffic control 

 

 

IEEE 1613 Environmental Standard for Electric Power Substations. 

                      See also Note for Power Substations in Section 3.2.4, 3.6.1, and 5.2.9 
 

 

IEC61850 EMC and Operating Conditions Class C for Power Substations 

 

 

 

Three years, return to factory   

Made in USA 

 

 

For a Configuration Guide, see the GarrettCom web site at 

(6K32TRC) 

Email 

 for additional details.