GarrettCom MAGNUM 6KM Manual De Usuario

Descargar
Página de 46
Magnum 6KM Mobile Ethernet Switch Installation and User Guide 
07/10 
 
ii 
www  GarrettCom  com
.
.
Federal Communications Commission
 
Radio Frequency Interference Statement 
 
This equipment generates uses and can radiate frequency energy and if not 
installed and used properly in strict accordance with the manufacturer's instructions, may 
cause interference to radio communication.  It has been tested and found to comply with the 
limits for a Class A computing device in accordance with the specifications in Subpart J of 
Part 15 of FCC rules, which are designed to provide reasonable protection against such 
interference when operated in a commercial environment.  Operation of this equipment in a 
residential area is likely to cause interference, in which case the user, at their own expense, 
will be required to take whatever measures may be required to correct the interference. 
 
 
                           Canadian Emissions Statement 
This Class A  digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.
 
Cet appareil respecte toutes les exigences du R
é
glement sur le mat
é
riel du Canada. Cet 
appareil est Classe A. 
 
Electrical Safety requirements: 
1. 
This product is to be installed Only in Restricted Access Areas 
 
(Dedicated Equipment Rooms, Electrical Closets, or the like). 
2. 
48VDC products shall be installed with a readily accessible disconnect 
 
device in the building installation supply circuit to the product. 
3. 
This product shall be provided with a maximum 10A DC Listed fuse or 
 
circuit breaker in the supply circuit when connected to a 48V 
 centralized 
source. 
4. 
The external power supply for DC units shall be Listed, Direct Plug In 
 
power unit, marked Class 2, or listed ITE Power Supply, marked LPS, 
 
which has suitably rated output voltage (i.e. 24VDC or 48VDC) and suitable 
 
rated output current. 
5. 
Product does not contain user replaceable fuses. Any internal fuses can 
 
ONLY be replaced by GarrettCom personnel through the RMA process.