GarrettCom P80C Manual De Usuario

Magnum P80F & P80C Personal Switches                      Installation and User Guide (07/03)

 

 

 

 

6 

.

.

negotiating ports.  For half- or full duplex selection on the P80F, and Full-fixed and Auto-

negotiation selection on the P80, see sections 4.3 and 4.4. 

          The Magnum P80 & P80F Personal Switches provide the switching speed and 

the reliability to smoothly support multiple workgroups at 100Mbps or 10 Mbps speed. The 

optional fiber port is normally configured and tested with the Magnum P80F unit in the factory, 

and available in all popular fiber connectors. 

Designed for use in departments with multiple workgroups, in remote offices, lab, 

classroom and in network traffic centers, or multi-system power users, the Magnum P80 & P80F  

Personal Switches are easy to install and use.  Addresses of attached nodes are automatically 

learned and maintained, adapting the switching services to network changes and expansions. 

Top-mounted LEDs provide status information on each port. The Magnum P80 & P80F Personal 

Switches provide high performance plug-and-play operation in compact packages. 

The P80 & P80F Personal switches are non-blocking on all ports and include 512KB 

packet buffers and 16K-node address table for advanced performance. The Magnum P80 & 

P80F Personal Switches, with store-and-forward switching, filter all faulty packets to minimize 

traffic congestion. 

Fiber ST above 

 

 

 

 

Fiber SC above 

The Magnum P80F chassis houses one main PC board.  The power supply unit is 

external.  The front side of the chassis has eight RJ-45 twisted-pair ports and one 100Mbps fiber 

Tx         Rx 

UPLINK

F

H

=     X

2SW

UPLINK 

             2            3            4              5            6            7             8

1SW

5V, 2Amps