GarrettCom P80C Manual De Usuario

Magnum P80F & P80C Personal Switches                      Installation and User Guide (07/03)

 

 

 

 

14 

.

.

This chapter provides instructions for installing Magnum P80-series units. 

 

The location of a Magnum P80F & P80C  Personal Switch is dependent on the 

physical layout of the network.  Typically the switch is located in a workplace site. The compact 

size of the unit allows it to be conveniently placed in an office, classroom or lab area, and it can 

also be either shelf- of wall-mounted (see mounting instructions in 3.1.2 below).  Metal wall-

mounting clips are included with the unit.  

 

Locate an AC receptacle that is within six feet (2 meters) of the intended Magnum 

P80F & P80C site.  The rugged metal case of the Magnum P80F & P80C will normally protect it 

from accidental damage in a lab or workplace setting.  Maintain an open view of the top surface 

to visually monitor the status LEDs. 
 

The Magnum P80F & P80C Personal switch can be easily mounted on a table-top or 

any suitable horizontal surface, and has four rubber feet to provide stability without scratching 

finished surfaces.  
 

Each Magnum P80-series 

Personal Switch is shipped with two metal 

mounting brackets (and screws) to allow the 

unit to be mounted in nearly any desired 

orientation or position.  The brackets are attached to the metal Switch case using one of the  

 

 

 

 

 

 

 

 

 

5VDC,